micro spring ? air core inductors document 163-1 document 163-1 revised 03/19/13 srf dcr part l 2 percent q 4 min 5 max 6 i rms 7 number 1 turns (nh) tol 3 min (ghz) (mohm) (a) 0906-2_l_ 2 1.65 10 ,5 100 10.0 4.0 1.6 0906-3_l_ 3 2.55 5,2 ,1 100 8.2 5.0 1.6 0906-4_l_ 4 3.85 5,2 ,1 100 7.5 6.0 1.6 0906-5_l_ 5 5.40 5,2 ,1 100 7.0 8.0 1.6 1606-6_l_ 6 5.60 5,2 ,1 100 6.5 9.0 1.6 1606-7_l_ 7 7.15 5,2 ,1 100 6.0 10 1.6 1606-8_l_ 8 8.80 5,2 ,1 100 6.0 12 1.6 1606-9_l_ 9 9.85 5,2 ,1 100 5.2 13 1.6 1606-10_l_ 10 12.55 5,2 ,1 100 4.6 14 1.6 1. when ordering, specify tolerance, termination and packaging codes: 1606-10 glc tolerance: f = 1% g = 2% j = 5% k = 10% (table shows stock tolerances in bold.) termination: l = rohs compliant tin-silver (96.5/3.5) over copper. special order: t = rohs tin-silver-copper (95.5/4/0.5) or s = non-rohs tin-lead (63/37). packaging: c = 7 machine-ready reel. eia-481 embossed plastic tape, 500 parts per full reel. b = less than full reel. in tape, but not machine-ready. to have a leader and trailer added ($25 charge), use code letter c instead. 2. inductance measured at 800 mhz using agilent/hp 4286 or equivalent with a coilcraft smd-a fxture and correlation. 3. tolerances in bold are stocked for immediate shipment. 4. q measured at 800 mhz using an agilent/hp 4291a with an agilent/ hp 16193a test fxture or equivalents. 5. srf measured using an agilent/hp 8720d or equivalent with a coilcraft smd-d fxture. 6. dcr tested on the cambridge technology model 510 micro-ohmmeter or equivalent. 7. current that causes a 15c temperature rise from 25c ambient. 8. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering. terminations rohs compliant tin-silver over copper other termina - tions available at additional cost. weight 0906: 10 C 12 mg; 1606: 18 C 27 mg ambient temperature C40c to +125c with i rms current, +125c to +140c with derated current storage temperature component: C40c to +140c. tape and reel packaging: C40c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles temperature coeffcient of inductance (tcl) +5 to +70 ppm/c moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) one per billion hours / one billion hours, calculated per telcordia sr-332 packaging 0906: 500 per 7 reel plastic tape: 8 mm wide, 0.3 mm thick, 4 mm pocket spacing, 1.5 mm pocket depth 1606: 500 per 7 reel plastic tape: 12 mm wide, 0.3 mm thick, 4 mm pocket spacing, 1.6 mm pocket depth pcb washing tested with pure water or alcohol only. for other solvents, see doc787_pcb_washing.pdf. ? small air core inductors feature high q and tight tolerances ? acrylic jacket provides a fat top for pick and place ? solder coated leads ensure reliable soldering dimensions are in inches mm us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2013 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check web site for latest infor mation.
document 163-2 document 163-2 revised 03/19/13 micro spring? air core inductors typical l vs frequency C 0906 series typical l vs frequency C 1606 series 0 2 4 6 8 10 12 14 100 1000 frequency (mhz) inductance (nh) 3.85 nh 2.55 nh 1.65 nh 5.40 nh 0 2 4 6 8 10 12 14 100 1000 frequency (mhz) inductance (nh) 12.55 nh 9.85 nh 8.80 nh 7.15 nh 5.60 nh typical q vs frequency C 0906 series typical q vs frequency C 1606 series 0 50 100 150 200 250 100 1000 frequency (mhz) q factor 1.65 nh 2.55 nh 3.85 nh 5.40 nh 0 50 100 150 200 250 100 1000 frequency (mhz) q factor 7.15 nh 12.55 nh 8.80 nh 5.60 nh 9.85 nh typical irms derating -40 -20 02 04 06 08 0 100 140 120 ambient temperature (c) 120 110 100 90 80 70 60 50 40 30 20 10 0 pe r cent of rated rms i 25c designer?s kit c308 contains 12 each of all values. designers it c308-2 contains12 each of all 2% values. us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2013 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check web site for latest infor mation.
|
